IMPLEMENTASI RFID DI LINGKUP KEBENCANAAN DALAM MENGURANGI WAKTU TUNGGU PEMBAGIAN BANTUAN

Banu Santoso; Windyarto Aziz Assidiqie; Marti Widya Sari

doi:10.26877/jitek.v8i1/Mei.11939

IMPLEMENTASI RFID DI LINGKUP KEBENCANAAN DALAM MENGURANGI WAKTU TUNGGU PEMBAGIAN BANTUAN

Banu Santoso, Windyarto Aziz Assidiqie, Marti Widya Sari

Abstract

Data collection system Distribution of disaster relief aid in evacuation centers which is still carried out conventionally where data collection on the identity of disaster victims will be recorded on a sheet of paper during the entry process at the refugee barracks, resulting in long queues and making it less conducive when distributing aid, it is necessary to design a system data collection service distribution of assistance to record the identity of disaster victims by using Radio Frequency Identification (RFID) in the form of a bracelet, by applying single-phase and multi-channel single-phase queuing models and using the prototyping method. The purpose of this research is to reduce the waiting time for the distribution of aid, so that there is no queue buildup. a data collection system with a conventional single-channel single-phase model should take 16 seconds, while a data collection system for distribution of assistance integrated with RFID takes only 2 seconds, while a data collection system for distribution of assistance with a conventional multi-channel single-phase model takes 22 seconds and which uses RFID takes 2 seconds. The trial results show that the distribution of assistance is faster when using a single-phase multi-channel queuing model.

Keywords

Multichannel Single Phase; Prototyping; Radio Frequency Identification (RFID); Single Channel Single Phase

Full Text:

PDF

References

Azizah, U. F. et al. (2020) “Efektivitas Layanan Mandiri Berbasis Teknologi Radio Frequency Identification ( Rfid ) Di Upt,” 4, hal. 81–89.

BNPB (2021) “Info bencana:Data dan Informasi Kebencanaan Bulanan Teraktual,” Bidang Pengelolaan Data dan Sistem Informasi BNPB, hal. 1–9. Tersedia pada: https://gis.bnpb.go.id/.

Catarinucci, L. et al. (2015) “An IoT-Aware Architecture for Smart Healthcare Systems,” IEEE Internet of Things Journal, 2(6), hal. 515–526. doi: 10.1109/JIOT.2015.2417684.

Elsa Putri Saptorini, Ema., ST., M. (2020) “Pembuatan Simulasi Pendeteksi Getaran,” Indept, 8(3), hal. 51–61.

Fajar Wicaksono, M. (2017) “Implementasi Modul Wifi Nodemcu Esp8266 Untuk Smart Home,” Jurnal Teknik Komputer Unikom-Komputika, 6(1), hal. 9–14.

Fitriansyah, A. (2016) “STRUKTUR DATA SISTEM PARKIR OTOMATIS BERBASIS TEKNOLOGI RADIO FREQUENCY IDENTIFICATION ( RFID ) Program Studi Teknik Informatika Fakultas Teknik , Matematika dan Ilmu Pengetahuan Alam Universitas Indraprasta PGRI,” Jurnal Universitas Indraprasta, 9(2), hal. 143–153.

Habsy, B. A. (2017) “Seni Memehami Penelitian Kuliatatif Dalam Bimbingan Dan Konseling : Studi Literatur,” JURKAM: Jurnal Konseling Andi Matappa, 1(2), hal. 90. doi: 10.31100/jurkam.v1i2.56.

Hikmaturokhman, A., Pamungkas, W. dan Malisi, M. A. S. (2014) “Analisis Kualitas Jaringan 2G Pada Frekuensi 900MHz Dan 1800MHz Di Area Purwokerto,” Jurnal Informatika,Telekomunikasi dan Elektronika, 5(2), hal. 1–9. doi: 10.20895/infotel.v5i2.57.

Jundiah (2015) “Penerapan layanan mandiri dalam sistem peminjaman dan pengembalian koleksi berbasis rfid pada kantor perpustakaan dan arsip kota administrasi jakarta barat.”

Lukman, M. P. dan Angriani, H. (2018) “Implementasi Teknologi Rfid Pada Sistem Antrian Rekam Medis Pasien Di Rumah Sakit,” ILKOM Jurnal Ilmiah, 10(1), hal. 105–112. doi: 10.33096/ilkom.v10i1.246.105-112.

Purnomo, D. (2017) “Model Prototyping Pada Pengembangan Sistem Informasi,” J I M P - Jurnal Informatika Merdeka Pasuruan, 2(2), hal. 54–61. doi: 10.37438/jimp.v2i2.67.

Ricky, M. Y. (2010) “Analisis dan Perancangan Sistem Informasi Laboratorium Rumah Sakit Kanker Dharmais Dengan Menggunakan Total Architecture Syntesis,” ComTech: Computer, Mathematics and Engineering Applications, 1(2), hal. 561. doi: 10.21512/comtech.v1i2.2556.

Sains, F. et al. (2018) “Sistem Antrian Kendaraan Pada Pelabuhan Penyeberangan Pamatata Dengan Metode RFID.”

Santoso, B., Bejo, A. dan Erna Permanasari, A. (2016) “Perbaikan Waktu Tunggu Pelayanan Pasien Rumah Sakit,” 2016(Sentika), hal. 18–19.

Syahriani, S., Basuki, B. dan Indriyani, L. (2021) “Information System for Inventory of Goods Using Prototype Model,” Jurnal Riset Informatika, 3(2), hal. 175–180. doi: 10.34288/jri.v3i2.218.

Zakaria, A. dan Prihantara, A. (2020) “Pemanfaatan Radio Frequency Identification Mifare RC522 dan Arduino Sebagai Media Validasi Kehadiran Mahasiswa,” Infotekmesin, 11(1), hal. 50–56. doi: 10.35970/infotekmesin.v11i1.105.

DOI: https://doi.org/10.26877/jitek.v8i1/Mei.11939