PENGEMBANGAN ALAT BANTU MESIN CUTTING BESI DENGAN SISTEM CONVEYOR SLIDING MENGGUNAKAN METODE RULA DAN REBA UNTUK MENGURANGI RISIKO GANGGUAN MUSKOLOSKELETAL

Isradias Mirajhusnita; Syaefulloh Syaefulloh; M. Fajar Nurwildani; Mohammad Cipto Sugiono; Hariyanto Hariyanto

doi:10.26877/jitek.v9i2/Nov.17365

PENGEMBANGAN ALAT BANTU MESIN CUTTING BESI DENGAN SISTEM CONVEYOR SLIDING MENGGUNAKAN METODE RULA DAN REBA UNTUK MENGURANGI RISIKO GANGGUAN MUSKOLOSKELETAL

Isradias Mirajhusnita, Syaefulloh Syaefulloh, M. Fajar Nurwildani, Mohammad Cipto Sugiono, Hariyanto Hariyanto

Abstract

This The purpose of this study, to identify complaints of Musculoskeletal Disorders (MSDs) experienced by workers at UD. Andika Aluminum and Welding, these complaints include pain in the upper arm, waist, right forearm, right wrist, and right and left knees. The results of the RULA and REBA scores obtained from the highest cutting activities before the use of work tools currently resulted in a high risk of 76 and 75 and decreased after the development of tools, namely to 40 and 39. Assessment of work posture for cutting with ergofellow software obtained RULA scores and the highest REBA is with a RULA score of 7 & 7 and a REBA of 12 & 11, which is included in the category "Immediate action is required" and after repairs are made to the highest score the work station cuts the RULA and REBA scores decreased with a RULA of 4 & 4 and REBA of 2 & 3 which are categorized in the "no action required" level of action.

Keywords

RULA, REBA, Ergofellow, Nordic Body Map

Full Text:

PDF

References

Abdulah, A., Studi Teknik Mesin, P., & Tinggi Teknologi Wastukancana, S. (n.d.). PERANCANGAN MESIN CUTTING CHEESE BLOCK DENGAN CUTTING TOOLS KAPASITAS 20 KG.

Chanty, E. (2019). ANALISIS FASILITAS KERJA DENGAN PENDEKATAN ERGONOMI REBA DAN RULA DI PERUSAHAAN CV.ANUGERAH JAYA. 2(2), 87–93.

Dzikrillah, N., Euis, D., Yuliani, N. S., & Kunci, K. (2015). ANALISIS POSTUR KERJA MENGGUNAKAN METODE RAPID UPPER LIMB ASSESSMENT (RULA) STUDI KASUS PT. TJ FORGE INDONESIA. In Jurnal Ilmiah Teknik Industri (Vol. 3, Issue 3).

Hignett, S., & McAtamney, L. (2000). Rapid Entire Body Assessment (REBA). Applied Ergonomics, 31(2), 201–205. https://doi.org/10.1016/S0003-6870(99)00039-3

Hunusalela, Z. F., Perdana, S., & Dewanti, G. K. (n.d.). Analisis Postur Kerja Operator Dengan Metode RULA dan REBA Di Juragan Konveksi Jakarta.

Julian Firdaus, E., & Angga Sujarno, P. (2023). Penilaian Postur Tubuh Pekerja dan Perbaikan Sistem Kerja dengan Metode RULA dan REBA pada PT. Sharp Electronics Indonesia. VIII(2).

Putra, A. O., Adelino, M. I., Putri, M., Putra, U., Pa-dang, I. Y. K., Padang, K., & Barat, S. (2021). Ana-lisis Resiko Ergonomi dengan Metode RULA dan REBA (Vol. 2, Issue 2). https://jise-upiyptk.org/ojs

Rawas, K. M. (2016). sebesar 19,471, dengan nilai F. 2(2), 1–19.

Rizky Sya’bana, A., & Herwanto, D. (2023). Analisis Postur Tubuh Menggunakan Metode RULA, REBA Pada Pekerja di Divisi Packaging. VIII(2).

Tiogana, V., & Hartono, N. (n.d.). Analisis Postur Kerja dengan Menggunakan REBA dan RULA di PT X Worker Posture Analysis Using REBA and RULA at PT X.

DOI: https://doi.org/10.26877/jitek.v9i2/Nov.17365