Establishment of An Academic Makerspace at the Bataan Peninsula State University: Prospects and Challenges

Emmanuel Calvento Macaraeg; Cristina Gutierrez Rivera; Ronnell Dominguez Dela Rosa; John Ryan Cortez Dizon

doi:10.26877/asset.v3i2.9655

Establishment of An Academic Makerspace at the Bataan Peninsula State University: Prospects and Challenges

Emmanuel Calvento Macaraeg, Cristina Gutierrez Rivera, Ronnell Dominguez Dela Rosa, John Ryan Cortez Dizon

Abstract

Makerspaces are now fixtures in smart cities and universities in advanced countries. Many universities, especially in the United States, have Academic Makerspaces serving students and faculty, helping them with their projects. In Bataan Peninsula State University our goal is to have an Academic Makerspace with services and facilities at par with international standards. This Academic Makerspace will be a place where our students can ideate, conceptualize, build and manufacture their projects, either academic projects, or just extracurricular projects they are interested in. The goal is to promote invention, innovation, creation and making. This study summarized the best practices of Academic Makerspaces in the United States. The practices of local innovation centers were also benchmarked. With this study, we have identified what facilities are needed, which equipment to purchase, and what kinds of programs should be made available in the Makerspace. Fund source, possible partner agencies, and other important details have been discussed. This study provides short- and long-term plans/programs which would be very important in the establishment of BPSU’s Academic Makerspace. These plans will be used to recommend future facilities/services in BPSU. The prospects and challenges of establishing an academic makerspace which would need careful consideration have been briefly discussed.

Keywords

Makerspaces, Academic Makerspace, STEM Education, Innovation,

Full Text:

PDF

References

Galaleldin, M., F. Bouchard, H. Anis, and C. Lague. 2017. The Impact of Makerspaces on Engineering Education. Proc. Canad Engr Ed Assoc.

A. Tom Byers, Tina Seelig, Sheri Sheppard and P. Weilerstein, “Entrepreneurship: Its Role in Engineering Education,” Bridg. - Natl. Acad. Eng., vol. 43, no. 2, 2013.

V. Wilczynski, “Academic maker spaces and engineering design,” in ASEE Annual Conference and Exposition, Conference Proceedings, 2015, vol. 122nd ASEE, no. 122nd ASEE Annual Conference and Exposition: Making Value for Society

José Luís Saorín∗, Dámari Melian-Díaz, Alejandro Bonnet,Carlos Carbonell Carrera, Cecile Meier, Jorge De La Torre-Cantero, Makerspace teaching-learning environment to enhancecreative competence in engineering students, Presentation at the 2017 International Symposium of Academic Makerspaces (ISAM 2017), Case Western Reserve University, Cleveland, Ohio, Sept. 24-27, 2019.

C. R. Forest, R. A. Moore, A. S. Jariwala, B. B. Fasse, J. Linsey, W. Newstetter, P. Ngo, and C. Quintero, “The invention studio: A university maker space and culture,” Adv. Eng. Educ., vol. 4, no. 2, 2014.

E. J. Van Holm, “Makerspaces and Contributions to Entrepreneurship,” Procedia - Soc. Behav. Sci., vol. 195, pp. 24–31, 2015.

Vincent Wilczynski, Andrew McLaughlin, Similarities and Differences between Academic Centers for Entrepreneurship, Innovation, and Making, Presentation at the 2017 International Symposium of Academic Makerspaces (ISAM 2017), Case Western Reserve University, Cleveland, Ohio, Sept. 24-27, 2019.

Jefferson Michael Poole, Prototyping Spaces for Entrepreneurship, Presentation at the 2017 International Symposium of Academic Makerspaces (ISAM 2017), Case Western Reserve University, Cleveland, Ohio, Sept. 24-27, 2019.

J. Moilanen, “Emerging Hackerspaces – Peer-production Generation,” pp. 94–111, 2012.

Umar Shehzad, Ali Murtaza, and Mustafa Naseem, Role of Academic Makerspaces in Creating Social Impact, Presentation at the 2017 International Symposium of Academic Makerspaces (ISAM 2017), Case Western Reserve University, Cleveland, Ohio, Sept. 24-27, 2019.

Lou, N.; Peek, K. (2016). By The Numbers: The Rise Of The Makerspace. retrieved 09.08.2016. from http://www.popsci.com/rise-makerspace-bynumbers.

Matthias Friessnig, Thomas Böhm, and Christian Ramsauer, The role of academic Makerspaces in product creation - Matching between hardware entrepreneur's requests and Maker Movement elements on offer, Proceedings of ISAM 2017, Paper No.: 026.

Gerschenfeld, N. (2012). How to Make almost Anything - the Digital Fabrication Revolution. Foreign Affairs, 91(6), 43-57.

Inkpen, A. C.; Tsang, E. W. K. (2005). Social Capital, Networks, And Knowledge Transfer. Academy of Management Review

Piller, F., & Ramsauer, C. (2014). Die Maker Economy - Neue Chance für Business Innovation. WINGbusiness.

Stefan Junk, Christian Kuen, Review of Open Source and Freeware CAD Systems for Use with 3D-Printing, Procedia CIRP 50 ( 2016 ) 430 – 435.

Hagel, J. (2014). A movement in the making. Deloitte University Press.

Kickstarter. (2017). Kickstarter stats. retrieved 17.07.2017. from https://www.kickstarter.com/help/stats .

Kelley T. (2001). The Art of Innovation, Crown Business

Eva Eriksson, Carl Heath, Peter Ljungstrand, Peter Parnes, Makerspace in school —Considerations from a large-scale national testbed, International Journal of Child-Computer Interaction 16 (2018) 9–15

P. Blikstein, Digital fabrication and ‘making’ in education: The democratization

of invention, in: J. Walter-Herrmann, C. Büching (Eds.), FabLabs: Of Machines,

Makers and Inventors, Bielefeld, 2013.

L. Hallnäs, J. Redström, Interaction Design, Foundations, Experiments. Swedish

School of Textiles, University College of Borås, Sweden, 2007.

J. Löwgren, E. Stolterman, Thoughtful Interaction Design: A Design Perspective on Information Technology, MIT Press, Cambridge, Mass, 2004.

R. Smith, O.S. Iversen, M. Hjorth, Design thinking for digital fabrication in education, Int. J. Child-Comput. Interact. 5 (2015) 1–38.

P. Blikstein, Gears of our childhood: constructionist toolkits, robotics, and

physical computing, past and future, in: Proceedings of IDC, 2013, ACM Press,

, pp. 173–182.

L. Rivas, Creating a classroom makerspace, in: Educational Horizons, vol. 93, 2014, pp. 125–126.

N. Gershenfeld, Fab: The Coming Revolution on Your Desktop–From Personal Computers to Personal Fabrication, Basic Books (AZ), 2007.

L. Martin, The promise of the maker movement for education, J. Pre-Coll. EDng. Educ. Res. 5 (1) (2015) Article 4.

R. Yin, Case Study Research. Design and Methods. Thousand Oaks, Sage, 1994.

Vasilis Niaros, Vasilis Kostakis, Wolfgang Drechsler, Making (in) the smart city: The emergence of makerspaces, Telematics and Informatics 34 (2017) 1143–1152.

Amanda C. Rutherford, Matthew Griffin, and Brad Stanton, Moving Towards a Diverse University Maker Culture, Proceedings of ISAM 2017, Paper No.36

Michael A. Vaughn, Why Making Matters: Pedagogy in practice, Proceedings of ISAM 2017, Paper No.:40.

National Council of Teachers of English. “How Standardized Tests Shape—and Limit—Student Learning,” Council Chronicle, 24.2, 2014, 2-3.

S.Stevens, D.Miretzky. “Faculty’s Perceptions of Students’ Characteristics: A for Effort Please,” Current Issues in Education, 15.2, 2012, 7.

Leah F. Rosenbaum and Björn Hartmann, Where Be Dragons? Charting the Known (and Not So Known) Areas of Research on Academic Makerspaces, Proceedings of ISAM 2017, Paper No.: 033

E. R. Halverson and K. Sheridan, "The maker movement in education", Harvard Educational Review, 84, 4. 2014, 495-504.

S. Vossoughi and B. Bevan, "Making and tinkering: A review of the literature", National Research Council Committee on Out of School Time STEM, 2014, 1-55.

Jason C.K. Tham, Writing in the Making: Integrating Design Thinking, Collaboration, and Material Literacy with Technical Writing Pedagogy, Proceedings of ISAM 2017, Paper No.: 048

Growth and Evolution of an Academic Makerspace in Guatemala, Angelica Rocha, Víctor Ayerdi, Mayarí Perez, Jonathan Lara, Byron García, and Roberto Estrada, Proceedings of ISAM 2017, Paper No.: 052

Megan E. Tomko, Ethan Hilton, Craig R. Forest, Kimberly G. Talley, Shaunna Smith, Robert Nagel, and Julie Linsey, Observations on Guiding Principles, or Best Practices, in University Makerspaces ISAM 2017 Paper No.: 056

Vincent Wilczynski, Aaron Hoover, Classifying Academic Makerspaces, Presentation at the 2017 International Symposium of Academic Makerspaces (ISAM 2017), Case Western Reserve University, Cleveland, Ohio, Sept. 24-27, 2019.

R. C. Advincula, J. R. C. Dizon, Q. Chen, I. Niu, J. Chung, L. Kilpatrick, and R. Newman, “Additive manufacturing for COVID-19: devices, materials, prospects, and challenges,” MRS Commun., vol. 10, no. 3, pp. 413–427, 2020.

J. R. C. D. J. R. R. Diego, D. W. C. Martinez, G. S. Robles, “Development of Smartphone-Controlled Hand and Arm Exoskeleton for Persons with Disability,” Open Eng., vol. 11, pp. 161–170, 21AD.

A. H. Espera, J. R. C. Dizon, Q. Chen, and R. C. Advincula, “3D-printing and advanced manufacturing for electronics,” Prog. Addit. Manuf., vol. 0, no. 0, p. 0, 2019, doi: 10.1007/s40964-019-00077-7.

J. R. C. Dizon, A. D. Valino, L. R. Souza, A. H. Espera, Q. Chen, and R. C. Advincula, “3D Printed Injection Molds using various 3D Printing Technologies,” Mater. Sci. Forum, vol. 1005, pp. 150–156, 2020, doi: https://doi.org/10.4028/www.scientific.net/MSF.1005.150.

3. J.R.C. Dizon, A.D. Valino, L.R. Souza, A.H. Espera, Jr., Q.Chen, R.C. Advincula, Three-dimensional-printed molds and materials for injection molding and rapid tooling applications, 2019, MRS Communications Prospectives Journal, 9, 4, DOI: https://doi.org/10.1557/mrc.2019.147.

L. D. Tijing, J. R. C. Dizon, I. Ibrahim, A. R. N. Nisay, H. K. Shon, and R. C. Advincula, “3D printing for membrane separation, desalination and water treatment,” Appl. Mater. Today, vol. 18, 2020, doi: 10.1016/j.apmt.2019.100486.

L.D. Tijing, J. R. C. Dizon, and G.G. Cruz, “3D-Printed Absorbers for Solar-Driven Interfacial Water Evaporation: A Mini-Review,” Submitt. to Adv. Sustain. Sci. Eng. Technol.

N. Andres, "Development of Solar-Powered Water Pump with 3D Printed Impeller" Open Engineering, vol. 11, no. 1, 2021, pp. 249-253. https://doi.org/10.1515/eng-2021-0015

J. R. C. Dizon, A. H. Espera, Q. Chen, and R. C. Advincula, “Mechanical characterization of 3D-printed polymers,” Addit. Manuf., vol. 20, 2018, doi: 10.1016/j.addma.2017.12.002.

J.R.C. Dizon, C.C.L. Gache, H.M.S. Cascolan, L.T. Cancino, R.C. Advincula, Post-processing of 3D-printed Polymers, Technologies, 2021, 9(3):61. https://doi.org/10.3390/technologies9030061.

A. D. Valino, J. R. C. Dizon, A. H. Espera Jr., Q. Chen, J. Messman, R. C. Advincula, Advances in 3D Printing of Thermoplastic Polymer Composites and Nanocomposites, Progress in Polymer Science, Volume 98 https://doi.org/10.1016/j.progpolymsci.2019.101162.

https://www.metal-am.com/two-additive-manufacturing-research-facilities-to-open-in-the-philippines/

Ali, P.J., Cooke, M., Culpepper, M.L., Forest, C.R., Hart-mann, B., Kohn, M., and Wilczynski, V. (2016, November), The Value of Campus Collaboration for Higher Education Makerspaces, International Symposium on Academic Mak-erspaces 2016, Cambridge, Massachusetts.

https://www.mc.edu.ph/innovation-center

https://business.inquirer.net/214634/henry-sy-donates-p100m-innovation-hub-to-miriam-college

https://www.pna.gov.ph/articles/1076713

DOI: https://doi.org/10.26877/asset.v3i2.9655

Refbacks

There are currently no refbacks.

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

Advance Sustainable Science, Engineering and Technology (ASSET)

E-ISSN: 2715-4211
Published by Science and Technology Research Centre

Universitas PGRI Semarang, Indonesia

Website: http://journal.upgris.ac.id/index.php/asset/index
Email: [email protected]