PERAN PEJABAT PEMBUAT KOMITMEN SEBAGAI PENGENDALI FUNGSI DALAM PEMBANGUNAN LANJUTAN LABORATORIUM B2P2TOOT TAWANGMANGU

Ruevan Evangelista Alboro, Leslie R. Jorge Acain, Cristina G. Rivera, Aaron Paul C. Rivera, Shiela Marie Roxas-Buce, Robert O. Aguilar, Ray Noel M. Delda, John Ryan C. Dizon

Abstract


This study investigates the general form of the determinant of negative integer powers of a special class of centrosymmetric matrices of even order. For an even positive integer and a positive integer , let denote such a matrix, and consider the matrix obtained by raising to the power . To determine , we first conjecture the general form of the inverse matrix by observing the patterns in the explicit inverses , and . The conjectured form is then verified by showing that and . The resulting inverse is used to construct the matrices , and ; from these cases we infer the general structure of . The validity of this general form is established using mathematical induction. Once the matrix has been obtained, an explicit closed-form expression for is derived via the cofactor expansion method. Finally, a numerical example is presented to illustrate the application of the determinant formula.


Keywords


literacy; local wisdom; natural and social science; wordwall

Full Text:

PDF

References


A. Espera Jr, J. R. C. Dizon, A. Valino, and R. C. Advincula, “Advancing flexible electronics and additive manufacturing,†Japanese Journal of Applied Physics, “Special Issue: Flexible and Printed Electronics (ICFPE2021),†2022. https://doi.org/10.35848/1347-4065/ac621a.

J-R. R. Diego, D. W. C. Martinez, G. S. Robles, and J. R. C. Dizon, “Development of Smartphone-controlled Hand and Arm Exoskeleton for Persons with One-Arm Disability (SCHAX),†Open Engineering, 2021; 11:161–170.

B. J. Tuazon, N. A. V. Custodio, R. B. Basuel, L. A. Delos Reyes, and J. R. C. Dizon, “3D Printing Technology and Materials for Automotive Application: A Mini-Review, Key Engineering Materials, 2022, vol. 913, https://doi.org/10.4028/p-26o076.

M. B. De Leon, U. B. Ante, M. S. Velasco, A. O. S. Ng, J. A. V. Garcia, F. P. Liza, R. C. Advincula, and J. R. C. Dizon, “3D-Printing for Cube Satellites (CubeSats): Philippines Perspectives, Engineering Innovations, 2022, vol. 1, https://doi.org/10.4028/p-35niy3.

E. C. Macaraeg, C. R. Rivera, R. D. Dela Rosa, and J. R. C. Dizon, “Establishment of An Academic Makerspace at the Bataan Peninsula State University: Prospects and Challenges,†Advance Sustainable Science, Engineering and Technology (ASSET), 2022, vol. 3, no. 2, pp. 0210202-01 ~ 0210202-09, DOI: https://doi.org/10.26877/asset.v3i2.9655.

E. B. Caldona, J. R. C. Dizon, R. A. Viers, V. J. Garcia, Z. J. Smith, and R. C. Advincula, “Additively manufactured high performance polymeric materials and their potential use in the oil and gas industry, MRS Communications,†2021, vol. 11, 701–715, https://doi.org/10.1557/s43579-021-00134-9.

D. W. Martinez, M. T. Espino, H. M. Cascolan, J. L. Crisostomo, and J. R. C. Dizon, “A Comprehensive Review on the Application of 3D Printing in the Aerospace Industry,†Key Engineering Materials, 2022, vol. 913, https://doi.org/10.4028/p-94a9zb.

J. L. B. Crisostomo, and J. R. C. Dizon, “3D Printing Applications in Agriculture,†“Food Processing, and Environmental Protection and Monitoring,†Advance Sustainable Science, Engineering and Technology (ASSET), 2021, vol. 3, No. 2, pp. 0210201-01 ~ 0210201-12, DOI: https://doi.org/10.26877/asset.v3i2.9627.

L. Tijing, J. R. C. Dizon, and G. Cruz Jr., “3D-Printed Absorbers for Solar-Driven Interfacial Water Evaporation: A Mini-Review, Advance Sustainable Science, Engineering and Technology, 3, 1, 0210103, 2021. http://journal.upgris.ac.id/index.php/asset/article/view/8367.

R. N. M. Delda, R. B. Basuel, R. P. Hacla, D. W. C. Martinez, J. -J. Cabibihan, and J. R. C. Dizon, “3D Printing Polymeric Materials for Robots with Embedded Systems and Technologies†2021, 9, 82. https://doi.org/10.3390/technologies9040082.

H. Wilkins, “Souvenirs: What and Why We Buy,†J. Travel Res., 2011, vol. 50, no. 3, pp. 239–247, doi: 10.1177/0047287510362782.

L. Héroux and N. J. Church, “Marketing Strategies of Gift and Souvenir Shops in Canada and the United States,†Téoros, 2018, vol. 33, no. 2, pp. 1–19, doi: 10.7202/1042438ar.

M. Meitiana, M. Setiawan, F. Rohman, and D. W. Irawanto, “Factors affecting souvenir purchase behavior: valuable insight for tourism marketers and industry,†J. Bus. Retail Manag. Res., 2019, vol. 13, no. 03, pp. 248–255, doi: 10.24052/jbrmr/v13is03/art-22.

K. K. Swanson and D. J. Timothy, “Souvenirs: Icons of meaning, commercialization, and commoditization,†Tour. Manag., 2012, vol. 33, no. 3, pp. 489–499, doi: 10.1016/j.tourman.2011.10.007.

L. F. Anderson and M. A. Littrell, “Souvenir-Purchase Behavior of Women Tourists,†1995, vol. 22, no. 2, pp. 328–348.

S J. Cave, and D. Buda, Souvenirs as transactions in place and identity: Perspectives from Aotearoa New Zealand. In J. Cave, L. Jolliffe, and T. Baum (Editors) 2013, Tourism Souvenirs: Glocal Perspectives on the Margins. Clevedon, UK: Channel View. Tourism and Cultural Exchange Series, pp. 98-118, DOI: 10.21832/9781845414078-008.

P. Paraskevaidis and K. Andriotis, “Values of souvenirs as commodities,†Tour. Manag., 2015, vol. 48, pp. 1–10, doi: 10.1016/j.tourman.2014.10.014.

F. Thompson, K. Hannam, and K. Petrie, “Producing Ceramic Artworks through Tourism Research,†Ann. Tour. Res., 2012, vol. 39, no. 1, pp. 336–360, doi: 10.1016/j.annals.2011.06.006.

E. Dussel, “No Titleì´ê²ƒì€ ìž„ì‹œë„ì„œ,†la “conquista†a la “colonización†del mundo la vida, 1994, vol. 1982, p. 323.

B. Neuhofer, D. Buhalis, and A. Ladkin, “Journal of Destination Marketing & Management Conceptualising technology enhanced destination experiences,†J. Destin. Mark. Manag., 2012, vol. 1, no. 1–2, pp. 36–46, doi: 10.1016/j.jdmm.2012.08.001.

A. Alafaghani, A. Qattawi, and M. A. Ablat, “Design Consideration for Additive Manufacturing: Fused Deposition Modelling,†Open J. Appl. Sci., 2017, vol. 07, no. 06, pp. 291–318, doi: 10.4236/ojapps.2017.76024.

S. J. Berman, “Digital transformation: Opportunities to create new business models,†Strateg. Leadersh., vol. 40, no. 2, pp. 16–24, 2012, doi: 10.1108/10878571211209314.

C. Anastasiadou and S. Vettese, “‘ From souvenirs to 3D printed souvenirs ’. Exploring the capabilities of additive manufacturing technologies in ( re ) -framing tourist souvenirs,†Tour. Manag., vol. 71, no. June 2018, pp. 428–442, 2019, doi: 10.1016/j.tourman.2018.10.032.

E. Further, “Scan the World We are a community-built museum of the future archiving the world’s sculptures, statues, and artifacts using 3D scanning and printing technology .â€

M. Groenendyk and R. Gallant, “3D printing and scanning at the Dalhousie University Libraries: A pilot project,†Libr. Hi-Tech, vol. 31, no. 1, pp. 34–41, 2013, doi: 10.1108/07378831311303912.

J. Kietzmann, L. Pitt, and P. Berthon, “Disruptions, decisions, and destinations: Enter the age of 3-D printing and additive manufacturing,†Bus. Horiz., vol. 58, no. 2, pp. 209–215, 2015, doi: 10.1016/j.bushor.2014.11.005.

T. Rayna and L. Striukova, “Open innovation 2.0: Is co-creation the ultimate challenge?†Int. J. Technol. Manag., vol. 69, no. 1, pp. 38–53, 2015, doi: 10.1504/IJTM.2015.071030.

M. Fairs, “Reduced Carbon Footprint Souvenirs by Héctor Serrano,†Dezeen, 2008.

R. Naty, “Statistics and Tourism Growth,†1Bataan, 2019.

Bataan.gov.ph, “ Special Events and Festivals in Bataanâ€, Travel to the Philippines, 2012.




DOI: https://doi.org/10.26877/asset.v4i2.13004

Refbacks

  • There are currently no refbacks.


Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.