Analysis of Improving the Quality of Fatty Acid Methyl Ester (FAME) Products Against Acid Value (AV) Levels Using the Six Sigma and Kaizen Methods

Mohammad Salva Afifi, Said Salim Dahda

Abstract


. PT XYZ is a palm oil derivative processing company that produces biodiesel / FAME (Fatty Acid Methyl Ester) products. However, there are several obstacles that still occur during the company's production process which causes the acid value (AV) level of FAME products to not meet specifications and there are 3% defective products. Therefore, this study aims to determine the improvement plan by applying kaizen to the Six Sigma improvement stage and reducing outspec products in the FAME production process. The results of the research conducted using the six sigma method show that the company has a DPMO value of 71,459 and a sigma value of 2.96 which is in the average position of the industry in Indonesia based on the results of data processing. While recommendations for improvement by implementing kaizen include training machine operators, making standard operating procedures (SOPs) for machine inspections on each shift, reducing the amount of strearin added to AV raw materials before pre-treatment, maintenance and machine calibration.  This step are expected to overcome the main problems identified in the study.

Keywords


Quality, Quality Control, Biodiesel, Six Sigma, DMAIC, Kaizen

Full Text:

PDF

References


Ridho Dwi Syahputra, “ANALISIS SIX SIGMA DALAM PENINGKATAN KUALITAS PRODUK CRUDE PALM OIL (CPO) GUNA MEMINIMALISIR DEFECT,” 2023.

M. Busyairi et al., “Potensi Minyak Jelantah Sebagai Biodiesel dan Pengaruh Katalis Serta Waktu Reaksi Terhadap Kualitas Biodiesel Melalui Proses Transesterifikasi,” Serambi Engineering, vol. V, no. 2, 2020.

R. Ramadhan, U. N. Harahap, and R. H. Nasution, “Penerapan metode Six Sigma pada pengendalian kualitas minyak goreng di PT. INNO-Wangsa Oil & Fat,” Jurnal VORTEKS, vol. 3, no. 1, pp. 141–148, Apr. 2022, doi: 10.54123/vorteks.v3i1.137.

F. Ahmad, “SIX SIGMA DMAIC SEBAGAI METODE PENGENDALIAN KUALITAS PRODUK KURSI PADA UKM,” JISI : JURNAL INTEGRASI SISTEM INDUSTRI VOLUME, vol. 6, 2019, doi: 10.24853/jisi.6.1.11-17.

J. Hasil, P. Dan, K. Ilmiah, N. Nurhayani, S. R. Putri, and A. Darmawan, “Analisis Pengendalian Kualitas Produk Outsole Sepatu Casual menggunakan Metode Six Sigma DMAIC dan Kaizen 6S.”

I. Septiawan, M. S. Ningsih, and I. Gunawan, “Analisis pengendalian kualitas pada Crude Palm Kernel Oil dengan metode Six Sigma di PT. X,” Jurnal VORTEKS, vol. 3, no. 1, pp. 166–173, Apr. 2022, doi: 10.54123/vorteks.v3i1.153.

A. Rahman and S. Perdana, “Analisis Perbaikan Kualitas Produk Carton Box di PT XYZ Dengan Metode DMAIC dan FMEA,” Jurnal Optimasi Teknik Industri, 2021.

B. R. Siwi, S. Nugroho, and W. P. St, “APLIKASI SIX SIGMA DMAIC DAN KAIZEN SEBAGAI METODE PENGENDALIAN DAN PERBAIKAN KUALITAS PRODUK PT. SARANDI KARYA NUGRAHA.”

Y. Ngatilah, U. Pembangunan Nasional, J. Timur Surabaya, C. Pujiastuti, I. Sains, and T. Akprind Yogyakarta Yogyakarta, “Use of Six Sigma and Kaizen Methods to Reduce Concrete Iron Defects (Case Study of PT. Hanil Jaya Steel),” 2018.

L. J. Cheng, “Implementing Six Sigma within Kaizen events, the experience of AIDC in Taiwan,” TQM Journal, vol. 30, no. 1, pp. 43–53, 2018, doi: 10.1108/TQM-02-2017-0017.

P. L. King, “KAIZEN EVENTS AS LEAN SIX SIGMA PROJECTS RAPID IMPROVEMENT WITH STRUCTURE AND DISCIPLINE,” 2010.

M. Ramadhan, “Analisis Pengendalian Kualitas Produksi Untuk Mengurangi Cacat Pada Produk Sepatu Menggunakan Metode Six Sigma dan Kaizen,” MATRIK : Jurnal Manajemen & Teknik Industri-Produksi, vol. XXII, no. 1, pp. 2621–8933, 2021, doi: 10.350587/Matrik.

A. Widodo and D. Soediantono, “Benefits of the Six Sigma Method (DMAIC) and Implementation Suggestion in the Defense Industry: A Literature Review,” INTERNATIONAL JOURNAL OF SOCIAL AND MANAGEMENT STUDIES (IJOSMAS), vol. 3, no. 3, 2022.

A. D. Wardana and Nina Mahbubah, “Integrating Seven Tools and Kaizen Approach in Evaluating Defects on Tofu Production Process,” Jurnal E-Komtek (Elektro-Komputer-Teknik), vol. 6, no. 1, pp. 101–113, Jun. 2022, doi: 10.37339/e-komtek.v6i1.879.

R. Saputri, P. Vitasari, E. Adriantantri, and P. Studi Teknik Industri S-, “IDENTIFIKASI TIMBULNYA PRODUK CACAT DENGAN METODE CTQ DAN DPMO PADA HOME INDUSTRY KERIPIK TEMPE SARI RASA,” Jurnal Mahasiswa Teknik Industri), vol. 5, no. 1, 2022.

M. Amerta Ivanda and H. Suliantoro, “ANALISIS PENGENDALIAN KUALITAS DENGAN METODE SIX SIGMA PADA PROSES PRODUKSI BARECORE PT. BAKTI PUTRA NUSANTARA.”

A. A. Hidayat, M. Kholil, J. Haekal, N. A. Ayuni, and T. Widodo, “Lean Manufacturing Integration in Reducing the Number of Defects in the Finish Grinding Disk Brake with DMAIC and FMEA Methods in the Automotive Sub Industry Company,” International Journal Of Scientific Advances, vol. 2, no. 5, 2021, doi: 10.51542/ijscia.v2i5.7.

H. Kartika, “| 22-32 JSTI JurnalSistem Teknik Industri *Corresponding author at:Jl Raya Meruya Selatan,” 2020.

Eko Prasetyo Prayogi Sihombing, “Analisa Pengendalian Kualitas Produk Dengan Metode Six Sigma dan Analisa Kaizen di CV. Bintang Terang Medan,” Manufaktur: Publikasi Sub Rumpun Ilmu Keteknikan Industri , vol. 2, pp. 1–18, 2024.

A. Ridwan, F. Arina, and A. Permana, “Peningkatan kualitas dan efisiensi pada proses produksi dunnage menggunakan metode lean six sigma (Studi kasus di PT. XYZ),” Teknika: Jurnal Sains dan Teknologi, vol. 16, no. 2, p. 186, Dec. 2020, doi: 10.36055/tjst.v16i2.9618.




DOI: https://doi.org/10.26877/asset.v6i2.18502

Refbacks

  • There are currently no refbacks.


Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

SLOT GACOR
https://kampus.lol/halowir/
https://vokasi.unpad.ac.id/gacor/?ABKISGOD=INFINI88 https://vokasi.unpad.ac.id/gacor/?ABKISGOD=FREECHIPS https://vokasi.unpad.ac.id/gacor/?ABKISGOD=DATAHK https://vokasi.unpad.ac.id/gacor/?ABKISGOD=TOTO+4D

https://build.president.ac.id/

https://build.president.ac.id/modules/

https://build.president.ac.id/views/

https://yudisium.ft.unmul.ac.id/pages/

https://yudisium.ft.unmul.ac.id/products/

https://yudisium.ft.unmul.ac.id/data/

https://ssstik.temanku.okukab.go.id/

https://snaptik.temanku.okukab.go.id/

https://jendralamen168.dinsos.banggaikab.go.id/gacor/

https://dinsos.dinsos.banggaikab.go.id/

https://kema.unpad.ac.id/wp-content/bet200/

https://kema.unpad.ac.id/wp-content/spulsa/

https://kema.unpad.ac.id/wp-content/stai/

https://kema.unpad.ac.id/wp-content/stoto/

Advance Sustainable Science, Engineering and Technology (ASSET)

E-ISSN: 2715-4211
Published by Science and Technology Research Centre

Universitas PGRI Semarang, Indonesia

Website: http://journal.upgris.ac.id/index.php/asset/index 
Email: asset@upgris.ac.id

slot gacor slot