Analysis of Column and Beam Minimum Reinforcement Requirements on the Building Structure of the Faculty of Psychology, University of Semarang

Trias Widorini, Ngudi Hari Crista, Lila Anggraini

Abstract


In formulating the seismic design criteria for a building at ground level or determining the amplification of the peak earthquake acceleration from the bedrock to the ground for a site, the site must be classified first. Site class assignment must be carried out through field and laboratory soil investigations. Site Class consists of SA (hard rock), SB (rock), SC (medium soil), SE (soft soil) and SF (special soil). SNI 1726: 2019 with various classes of SB, SC, SD and SE sites. From the analysis results, it is found that the variation of soil site classes has an effect on the area of minimum reinforcement requirements, except for the logitudinal reinforcement requirements of the lower support beam for site class variations, the value is fixed. The variation of soil site classes has a significant effect on the area requirements of the longitudinal reinforcement in the column. The largest requirement for column longitudinal reinforcement is Soft Soil Site Class (E) and the smallest requirement is Rock Site Class (B).


Full Text:

PDF

References


Widodo Prawirodikromo, Analisis Dinamika Struktur, (Yogyakarta: Cetakan I, Pustaka Pelajar, 2017).

Badan Standarisasi Nasional, SNI 1726:2019 Tata Cara Perencanaan Ketahanan Gempa untuk Struktur Bangunan Gedung dan Non Gedung (Jakarta: Badan Standarisasi Nasional, 2019).

Achmad Hambali, Perbandingan Perencanaan Struktur Tahan Gempa berdasarkan SNI 03-1726-2002 dan SNI01726:2012, Tugas Akhir, Universitas Muhammadiyah Yogyakarta, Yogyakarta, 2016.

Bambang Purnijanto, Mukti Wiwoho, Ngudi Hari Crista, Perbandingan Analisis Struktur Gedung Fakultas Psikologi USM (Empat Lantai Gedung T) Menggunakan SNI Gempa 03-1726-2002 dengan SNI Gempa 03-1726-2012, Teknika, 9(2), 2015, 12-22.

Meassa Monikha Sari, Studi Perbandingan Respon Spektra Kota Taruntung Berdasarkan SNI 03-1726-2002 dan SNI 1726:2013 untuk Evaluasi Pelaksanaan Bangunan Tahan Gempa, Konferensi Nasional Teknik Sipil 7, Surakarta, 2013, 277-284.

Sari Farlianti, Sapta, Perhitungan Respon Spektra Percepatan Gempa Kota Palembang Berdasarkan SNI 1726:2019 Sebagai Revisi Terhadap SNI 1726:2012, Teknika:Jurnal Ilmiah, 6(2), 2020, 167-177.

Budi R T, Kasmat S N, Mirzan G, Analisis Pengaruh Faktor Modifikasi Respon SRMK Struktur Gedung Beton Bertulang Pada Balok Katagori Desain Seismik D, Jurnal Teknik, 17 (1), 2019, 57-65.

Anonim, Desain Spektra Indonesia, http://puskim.pu.go.id/Aplikasi/desain_spektra_indonesia_2011/

Indarto, H, Buku Ajar Mekanika Getaran dan Rekayasa Gempa (Semarang: Universitas Diponegoro 2005).

Badan Standarisasi Nasional, SNI 1726:2012 Tata Cara Perencanaan Ketahanan Gempa untuk Struktur Bangunan Gedung dan Non Gedung (Jakarta: Badan Standarisasi Nasional, 2012).

Badan Standarisasi Nasional, SNI 2847:2013 Persyaratan Beton Struktural untuk Bangunan Gedung (Jakarta: Badan Standarisasi Nasional, 2013).

Dipohusodo, I, Struktur Beton Bertulang (Jakarta: Gramedia, 2002).

Ngudi Hari Crista, Trias Widorini, Belajar Mandiri Membuat Struktur Rumah Dua Lantai dengan SAP 2000 (Yogyakarta: Andi, 2018).




DOI: https://doi.org/10.26877/ijosbie.v2i1.8418

Refbacks

  • There are currently no refbacks.



Copyright of International Journal of Sustainable Building, Infrastructure and Environment (IJOSBIE) ISSN 2716-4829 (online)

Universitas PGRI Semarang
Jl. Sidodadi Timur No. 24 - Dr. Cipto Semarang

Dr. Putri Anggi Permata S., M.T
Phone : +62 878 3229 1959
Email: [email protected]