PERBANDINGAN JENIS SEMEN PCC DAN OPC DENGAN UJI KONSISTENSI NORMAL DAN WAKTU IKAT SEMEN

Bagas Wahyu Adhi, Betty Hariyani, Rio Ridwan Nurrohim, Satrio Adi Wahyu Nugroho, Hendramawat Aski Safarizki, Mochammad Qomaruddin

Abstract


Cement setting time is the time required for cement to harden, calculated from when the cement begins to react with water to form a paste. Cement setting time refers to the period of time required for cement paste mixed with water to become stiff enough to form a structure and bind construction materials. The purpose of this study was to determine the normal consistency of cement and cement setting time for PCC and OPC cement. The results of this study are for the Normal Consistency test of Portland Cement PCC Ex. Tiga Roda with a penetration target of 10 mm obtained a water content of 30.8%. Normal Consistency test of Portland Cement OPC Ex. Tiga Roda with a penetration target of 10 mm obtained a water content of 26.4%. Testing the Setting Time of Portland cement PCC Ex. Tiga Roda obtained penetration at Initial Setting of 112 mm, Final Setting of 210 mm. Testing the Setting Time of Portland cement OPC Ex. Tiga Roda obtained penetration at Initial Setting of 111 mm, Final Setting of 210 mm.

Keywords


cement setting time; consistency portland cement; PCC Cement; OPC Cement

Full Text:

PDF

References


Adhi, B. W., Setiyanto, B., & Kurniawan, A. (2022). Pemanfaatan Tempurung Kelapa dan Serbuk Kayu dalam Inovasi Self Compacting Concrete. Proceeding Science and Engineering National Seminar.

Arianto, R., Kurniawandy, A. & E. (2021). Kuat Tekan Beton dan Waktu Ikat Semen Portland Pozzolan. Jurnal Fakultas Teknik Universitas Riau, 1–14.

Bagas Wahyu Adhi., A. H., Setiyanto., B., Kurniawan., A., Syahputra., H. N., Prastika., A. Y., Nurrohim., R. R., Nugroho., S. A. W., & Mayasari, S. (2024). Utilization of Granite Marble Waste as a Coarse Aggregate Substitute and Shell and Egg Shell Waste as a Cement Substitute in Environmentally Friendly Concrete Innovations. Media Komunikasi Dunia Ilmu Sipil, 6(2).

Firdaus, & Yuda, H. B. (2022). Waktu Ikat Mortar “ Semen “ Geopolymer Berbasis Fly Ash dan Kapur. Jurnal TEKNO, 279291.

Hargono, Jaeni, M., & Budi, F. S. (2022). Pengaruh Perbandingan Semen Pozolan dan Semen Portland terhadap Kekekalan Bentuk dan Kuat Tekan Semen. Momentum, 5(2), 21–25.

Istighfar, Irfan, A. K., & Ermiyati Ermiyati. (2019). Analisa perbandingan kuat tekan beton semen PCC dan semen tipe 1 terhadap pemakaian sikament NN. Doctoral dissertation, Riau University.

Mulyati & Suhendri. (2013). Studi Perbandingan Kuat Tekan Beton Normal Menggunakan Semen Portland Tipe I dan Portland Composite Cement. Jurnal Momentum, 15(2).

sujipto, D. (2020). Road to semen Indonesia : transformasi korporasi : mengubah konflik menjadi kekuatan. DKI Jakarta: Kompas.

Trimurtiningrum, R., Sutriono, B., Arrowrichta, B., Watu, H. B., & Misrawi. (2020). Pengaruh Bahan Tambah Gula Pasir Terhadap Waktu Pengikatan dan Kuat Tekan. Jurnal Teknik Sipil, 6(1), 1–11.

Triwiyana, K. P, S. (2017). Analisis Strategi Perusahaan dalam Mencapai Keunggulan Bersaing (Studi Pada PT. Semen Indonesia (Persero) Tbk.). Jurnal Administrasi Bisnis, 68–77.

Wijaya, M. F., Olivia, M., & Saputra, E. (2019). Kuat Tekan Mortar Geopolimer Abu Terbang Hybrid menggunakan Semen Portland. Jurnal Teknik, 13(1), 61–69.




DOI: https://doi.org/10.26877/giratory.v7i1.28126

Refbacks

  • There are currently no refbacks.


Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

Jurnal Teknik Sipil Giratory UPGRIS

Program Studi Teknik Sipil

Fakultas Teknik dan Informatika

Universitas PGRI Semarang