ANALISIS PRODUKTIVITAS PEKERJAAN PENULANGAN KOLOM 20X30 PADA PROYEK PEMBANGUNAN GUDANG LOGISTIK DI POLRES LAMONGAN

Ainun Nurin Sharvina, Mochamad Reyza Putra Sugfa Putra Sugfa, Muhammad Latif, Auliya Rochmania, Nuriya Yasmina Fajri, Ibnu Toto Husodo

Abstract


Productivity is a crucial indicator in assessing the efficiency of construction project implementation. This study aims to analyze the productivity of reinforcement work on 20x30 cm columns in the construction project of the Logistics Warehouse at the Lamongan Police Headquarters. The research employed a descriptive quantitative method with a case study approach, using data from field observations, documentation, and interviews. The results indicate that the actual labor productivity for rebar installation was 80.69 kg/OH. This value is compared to the national productivity standard outlined in the Ministry of Public Works and Housing Regulation (Permen PUPR) No. 8 of 2023, which is 90 kg/OH. Thus, the productivity observed on-site is 9.31 kg/OH or approximately 10.34% below the standard. Factors influencing this discrepancy include worker skill, work methods, site conditions, and the availability of tools and materials. The study recommends improvements in worker training, optimization of supporting equipment, and enhanced time management and supervision to increase productivity in similar projects

Keywords


Productivity; Column Reinforcement; Labor; Construction Project

Full Text:

PDF

References


Abdel-Razek, R.H., Diab, A.M., & Mohamed, S.E. (2007). Pengukuran Produktivitas Tenaga Kerja Dalam Proyek Konstruksi. Jurnal Manajemen Konstruksi Dan Teknik Sipil, 133(9), 682–690.

American Institute Of Steel Construction (Aisc). (2010). Manual Konstruksi Baja Edisi Ke-14. Chicago: Aisc.

Badan Standardisasi Nasional. (2000). Sni 03-2834-2000: Tata Cara Penyusunan

Rencana Campuran Beton Normal. Jakarta: Bsn.

Bowyer, J.L., Shmulsky, R., & Haygreen, J.G. (2003). Ilmu Kayu Dan Produk Hutan: Suatu Pendekatan Terapan. Iowa: Iowa State Press.

Chen, W.F., & Duan, L. (2014). Buku Pegangan Rekayasa Jembatan: Konstruksi Dan Pemeliharaan. Boca Raton: Crc Press.

Forest Products Laboratory. (2010). Panduan Kayu: Sumber Daya Rekayasa Kayu. Madison: Dinas Kehutanan Amerika Serikat.

Harris, F., & Mccaffer, R. (2013). Manajemen Konstruksi Modern (Edisi Ke-7). Oxford: Wiley-Blackwell.

Hendrickson, C., & Au, T. (2000). Manajemen Proyek Untuk Konstruksi: Konsep Dasar Bagi Pemilik, Insinyur, Dan Arsitek. Pittsburgh: Prentice Hall.

Horner, R.M.W., & Duff, A.R. (2001). Panduan Kontraktor Untuk Peningkatan Produktivitas Dalam Proyek Konstruksi. Reading: Ciria.

Karim, N.A.H.S.Y.J., & Karim, H.M. (2013). Produktivitas Tenaga Kerja Dalam Proyek Konstruksi. Jurnal Aplikasi Teknik Sipil, 3(4), 1–8.

Kosmatka, S.H., Kerkhoff, B., & Panarese, W.C. (2002). Perencanaan Dan Pengendalian Campuran Beton. Illinois: Portland Cement Association. Macgregor, J.G., & Wight, J.K. (2012). Desain Dan Mekanika Beton Bertulang (Edisi Ke-6). New Jersey: Pearson Education.

Mamlouk, M.S., & Zaniewski, J.P. (2011). Material Teknik Sipil Dan Konstruksi (Edisi Ke-3). New Jersey: Pearson Prentice Hall.

Mindess, S., Young, J.F., & Darwin, D. (2003). Teknologi Beton Modern (Edisi Ke-2). NewJersey: Pearson.

Mulyadi. (2007). Perencanaan Dan Pengendalian Sistem Manajemen. Jakarta: Salemba Empat.

Mulyono, T. (2003). Teknologi Beton: Teori Dan Praktik. Yogyakarta: Andi.

Neville, A.M. (2011). Sifat-Sifat Beton (Edisi Ke-5). Harlow: Pearson.

Nilson, A.H., Darwin, D., & Dolan, C.W. (2010). Desain Struktur Beton (Edisi Ke-14). New York: Mcgraw-Hill.

Oglesby, C.H., Parker, H.W., & Howell, G.A. (1989). Peningkatan Produktivitas Dalam Konstruksi. New York: Mcgraw-Hill.

Oyawa, W.O., Omenge, P.W., & Nyambeki, E.S. (2011). Perilaku Kolom Komposit Beton-Baja Dalam Struktur. Jurnal Teknik Sipil Dan Struktur, 2(1), 327–336.

Permen Pupr. (2023). Peraturan Menteri Pekerjaan Umum Dan Perumahan Rakyat Nomor 8 Tahun 2023 Tentang Pedoman Analisa Harga Satuan Pekerjaan (Ahsp). Jakarta: Kementerian Pupr.

Salmon, C.G., Johnson, J.E., & Malhas, F.A. (2009). Struktur Baja: Desain Dan Perilaku (Edisi Ke-5). New Jersey: Pearson.

Soekiman, A., Pribadi, K.S., Soemardi, B.W., & Wirahadikusumah, R.D. (2011). Faktor- Faktor Yang Mempengaruhi Produktivitas Tenaga Kerja Terhadap Kinerja Jadwal Proyek Di Indonesia. Procedia Engineering, 14, 865–873.

Soeharto, I. (1999). Manajemen Proyek: Dari Konsep Awal Hingga Operasional. Jakarta: Erlangga.

Sugiyono. (2019). Metodologi Penelitian Kuantitatif, Kualitatif Dan R&D. Bandung: Alfabeta.




DOI: https://doi.org/10.26877/giratory.v7i1.28132

Refbacks

  • There are currently no refbacks.


Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

Jurnal Teknik Sipil Giratory UPGRIS

Program Studi Teknik Sipil

Fakultas Teknik dan Informatika

Universitas PGRI Semarang