3D Printing Applications in Agriculture, Food Processing, and Environmental Protection and Monitoring

Jan Lloyd Buenaventura Crisostomo; John Ryan Cortez Dizon

doi:10.26877/asset.v3i2.9627

3D Printing Applications in Agriculture, Food Processing, and Environmental Protection and Monitoring

Jan Lloyd Buenaventura Crisostomo, John Ryan Cortez Dizon

Abstract

This paper presents a mini review of the applications of 3D printing, formally known as additive manufacturing, in the fields of agriculture, food processing, and the environment protection and monitoring. The paper discusses materials used in 3D printing, the different printing technologies employed in the process, as well as its prospects. PLA and ABS thermoplastics find the most application in the field of agriculture as they are affordable filaments available in the market and they are relatively easy to print. The direct extrusion of food helps people with swallowing difficulties increase their food intake as well as customize their diet. As for the environment, applications in water desalination and air quality monitoring are among the use cases of 3D printing presented in this paper.

Keywords

3D Printing; Additive Manufacturing; Agriculture; Food; Environment

Full Text:

PDF

References

Dizon, J. R. C., Espera, A. H., Chen, Q., & Advincula, R. C. (2018). Mechanical characterization of 3D-printed polymers. Additive Manufacturing, 20(December), 44–67. https://doi.org/10.1016/j.addma.2017.12.002

Dizon, J. R. C., Valino, A. D., Souza, L. R., Espera, A. H., Chen, Q., & Advincula, R. C. (2020). 3D printed injection molds using various 3D printing technologies. Materials Science Forum, 1005 MSF, 150–156. https://doi.org/10.4028/www.scientific.net/MSF.1005.150

ALL3DP, https://all3dp.com/1/3d-printed-house-homes-buildings-3d-printing-construction/

(Accessed date: April 2017).

A.H. Espera, J.R.C. Dizon, Q. Chen, and R.C. Advincula, 3D-printing and advanced manufacturing for electronics. Progress in Additive Manufacturing. https://doi.org/1007/s40964-019- 00077-7

Advincula, R. C., Dizon, J. R. C., Chen, Q., Niu, I., Chung, J., Kilpatrick, L., & Newman, R. (2020). Additive manufacturing for COVID-19: Devices, materials, prospects, and challenges. MRS Communications, 10(3), 413–427. https://doi.org/10.1557/mrc.2020.57

Al-Dulimi, Z., Wallis, M., Tan, D. K., Maniruzzaman, M., & Nokhodchi, A. (2021). 3D printing technology as innovative solutions for biomedical applications. Drug Discovery Today, 26(2), 360–383. https://doi.org/10.1016/j.drudis.2020.11.013

Wong, J. Y. (2016). 3D printing applications for space missions. Aerospace Medicine and Human Performance, 87(6), 580–582. https://doi.org/10.3357/AMHP.4633.2016

J. Mohammed: Applications of 3D printing technologies in oceanography. Methods Oceanogr. 17, 97 (2016).

3D Print, https://3dprint.com/165561/3d-printing-in-the-military/ (Accessed date: Feb. 2017)

J.R.R. Diego, D.W.C. Martinez, G.S. Robles, J.R.C. Dizon, Development of Smartphone-controlled Hand and Arm Exoskeleton for Persons with One-Arm Disability (SCHAX), Open Engineering, 2021; 11:161–170.

J.R.C. Dizon, C.C.L. Gache, H.M.S. Cascolan, L.T. Cancino, R.C. Advincula, Post-processing of 3D-printed Polymers, Technologies, 2021, 9(3):61. https://doi.org/10.3390/technologies9030061.

A. D. Valino, J. R. C. Dizon, A. H. Espera, Q. Chen, J. Messman, and R. C. Advincula, “Advances in 3D printing of thermoplastic polymer composites and nanocomposites,” Prog. Polym. Sci., vol. 98, 2019, doi: 10.1016/j.progpolymsci.2019.101162.

J.R.C. Dizon, A.D. Valino, L.R. Souza, A.H. Espera, Jr., Q. Chen, R.C. Advincula, 3D-printed molds and materials for injection molding and rapid tooling applications, 2019, MRS Communications Prospectives Journal, 9, 4, DOI: https://doi.org/10.1557/mrc.2019.147.

L. D. Tijing, J. R. C. Dizon, I. Ibrahim, A. R. N. Nisay, H. K. Shon, and R. C. Advincula, “3D printing for membrane separation, desalination and water treatment,” Appl. Mater. Today, vol. 18, 2020, doi: 10.1016/j.apmt.2019.100486.

L.D. Tijing, J. R. C. Dizon, G.G. Cruz Jr., “3D-Printed Absorbers for Solar-Driven Interfacial Water Evaporation: A Mini-Review,” Adv. Sustain. Sci. Eng. Technol., 3, 1, 2021, https://doi.org/10.26877/asset.v3i1.8367

Pearce, J. M. (2015). Applications of Open Source 3-D Printing on Small Farms. Organic Farming, 1(1), 19–35. https://doi.org/10.12924/of2015.01010019

Podchasov, E. O. (2021). Design and Technological Features of 3D-Printing Usage in Agricultural Machines Gearings Repair. International Journal of Mechanical Engineering and Robotics Research, 10(1), 32–37. https://doi.org/10.18178/IJMERR.10.1.32-37

Derossi, A., Caporizzi, R., Azzollini, D., & Severini, C. (2018). Application of 3D printing for customized food. A case on the development of a fruit-based snack for children. Journal of Food Engineering, 220, 65–75. https://doi.org/10.1016/j.jfoodeng.2017.05.015

Pant, A., Lee, A. Y., Karyappa, R., Lee, C. P., An, J., Hashimoto, M., Tan, U. X., Wong, G., Chua, C. K., & Zhang, Y. (2021). 3D food printing of fresh vegetables using food hydrocolloids for dysphagic patients. Food Hydrocolloids, 114(October 2020), 106546. https://doi.org/10.1016/j.foodhyd.2020.106546

Mohammed, M. I., Wilson, D., Gomez-Kervin, E., Rosson, L., & Long, J. (2019). EcoPrinting: Investigation of Solar Powered Plastic Recycling and Additive Manufacturing for Enhanced Waste Management and Sustainable Manufacturing. 2018 IEEE Conference on Technologies for Sustainability, SusTech 2018, 1–6. https://doi.org/10.1109/SusTech.2018.8671370

Salamone, F., Belussi, L., Danza, L., Ghellere, M., & Meroni, I. (2015). Design and development of nEMoS, an all-in-one, low-cost, web-connected and 3D-printed device for environmental analysis. Sensors (Switzerland), 15(6), 13012–13027. https://doi.org/10.3390/s150613012

Martín de Vidales, M. J., Nieto-Márquez, A., Morcuende, D., Atanes, E., Blaya, F., Soriano, E., & Fernández-Martínez, F. (2019). 3D printed floating photocatalysts for wastewater treatment. Catalysis Today, 328(January), 157–163. https://doi.org/10.1016/j.cattod.2019.01.074

Tan, C., Toh, W. Y., Wong, G., & Li, L. (2018). Extrusion-based 3D food printing - Materials and machines. International Journal of Bioprinting, 4(2), 1–13. https://doi.org/10.18063/IJB.v4i2.143

Markforged. PLA vs ABS vs Nylon. 2021. Accessed on: June 16, 2021. [Online] Available: https://markforged.com/resources/blog/pla-abs-nylon

Sharretts Plating Company, What Materials are Used for 3D Printing? 2017. Accessed on: June 16, 2021. [Online] Available: https://www.sharrettsplating.com/blog/materials-used-3d-printing/

i.materialise, https://i.materialise.com/en/3d-printing-materials/metals#preciousMetals (Accessed date: June 2021)

Proximity Designs. https://proximitydesigns.org/service/farm-tech/ (Accessed date: June 2021)

Garuda3D. 3D Printing in Agriculture. 2021. Accessed on: June 16, 2021. [Online] Available: https://garuda3d.com/3d-printing-in-agriculture

Halterman, TE. 3D Printing Helps Test Crop Seeding System. 3DPrint.com. March 3, 2015. Accessed on: June 16, 2021. [Online] Available: https://3dprint.com/48469/3d-printing-groundbreaking/

Technical Center for Agricultural and Rural Cooperation. Exploring the potential of 3D printing for agriculture. November 2, 2017. Accessed on: June 16, 2021. [Online] Available: https://www.cta.int/en/blog/all/article/exploring-the-potential-of-3d-printing-for-agriculture-sid0e875bb2c-478a-4577-975b-a8197d441ef3

Wolf, M. 3D Food Printing Startup BeeHex Debuts a Cake Decorating Robot. May 27, 2019. Accessed on: June 16, 2021. [Online] Available: https://thespoon.tech/beehex-ships-hi-volume-cookie-cake-decorating-robot/

Liu, Z., Bhandari, B., Prakash, S., & Zhang, M. (2018). Creation of internal structure of mashed potato construct by 3D printing and its textural properties. Food Research International, 111(May), 534–543. https://doi.org/10.1016/j.foodres.2018.05.075

The Conversation. https://theconversation.com/would-you-eat-a-3d-printed-pizza-70335 (Accessed date: June 2020)

Liu, Z., Zhang, M., Bhandari, B., & Wang, Y. (2017). 3D printing: Printing precision and application in food sector. Trends in Food Science and Technology, 69, 83–94. https://doi.org/10.1016/j.tifs.2017.08.018

Guo, F., Silverberg, G., Bowers, S., Kim, S. P., Datta, D., Shenoy, V., & Hurt, R. H. (2012). Graphene-based environmental barriers. Environmental Science and Technology, 46(14), 7717–7724. https://doi.org/10.1021/es301377y

C. V. The 12 Initiatives that Combine 3D Printing & Sustainability. 3Dnatives. April 22, 2019. Accessed on: June 16, 2021. [Online] Available: https://www.3dnatives.com/en/3d-printing-sustainability-220420194/#!

Akowanou, A. V. O., Deguenon, H. E. J., Groendijk, L., Aina, M. P., Yao, B. K., & Drogui, P. (2019). 3D-printed clay-based ceramic water filters for point-of-use water treatment applications. Progress in Additive Manufacturing, 4(3), 315–321. https://doi.org/10.1007/s40964-019-00091-9

Bian, B., Shi, D., Cai, X., Hu, M., Guo, Q., Zhang, C., Wang, Q., Sun, A. X., & Yang, J. (2018). 3D printed porous carbon anode for enhanced power generation in microbial fuel cell. Nano Energy, 44(November 2017), 174–180. https://doi.org/10.1016/j.nanoen.2017.11.070

Ming, Y., Duan, Y., Zhang, S., Zhu, Y., & Wang, B. (2020). Self-heating 3D printed continuous carbon fiber/epoxy mesh and its application in wind turbine deicing. Polymer Testing, 82(December 2019), 106309. https://doi.org/10.1016/j.polymertesting.2019.106309

DOI: https://doi.org/10.26877/asset.v3i2.9627

Refbacks

There are currently no refbacks.

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

Advance Sustainable Science, Engineering and Technology (ASSET)

E-ISSN: 2715-4211
Published by Science and Technology Research Centre

Universitas PGRI Semarang, Indonesia

Website: http://journal.upgris.ac.id/index.php/asset/index
Email: [email protected]