Optimizing Sample Warehouse Layout At PT BIJ: Comparative Study Of Dedicated And Class-Based Storage

Muhammad Wildan Arif; Deny Andesta

doi:10.26877/asset.v6i2.18727

Optimizing Sample Warehouse Layout At PT BIJ: Comparative Study Of Dedicated And Class-Based Storage

Muhammad Wildan Arif, Deny Andesta

Abstract

PT. BIJ is an analytical laboratory services company, therefore PT. BIJ needs a good warehouse to be able to accommodate the samples it has PT. BIJ experienced problems with sample storage. Therefore, it is necessary to improve the sample storage system to make it easier to find samples to be analyzed. Using the Dedicated Storege and Class Base Storage methods will help provide grouping for each type of sample and place the samples in the right place so that the sample travel distance is shorter. The results of the research carried out can be obtained that the initial travel distance is 262.98 meters, while the proposed dedicated storage distance is 163.19 meters and the proposed basic class storage distance is 149.95 meters, so there is the largest percentage difference of 42.89%. So it can be concluded that using the class base storage method is better than the dedicated storage method.

Keywords

Warehouse Optimization; Dedicated Storage; Class Base Storage

Full Text:

PDF

References

Indrawan, Andi Steven. "Perbaikan Tata Letak Gudang Distribusi dengan Data mining, Dedicated Storage dan Multi-product Slot Allocation." Jurnal Teknik Industri 12.1 (2022): 9-20.

Suwarno, Basuki Arianto, and Karel L. Mandagie. "Perancangan Tata Letak Gudang Produk Jadi Cat Dengan Metode Dedicated Storage Di Pt. Akzonobel Car Refinishes Indonesia." Jurnal Teknik Industri 8.2 (2021).

Prasetyo, Yuyut Tri, and Ahmad Fatih Fudhla. "Perbaikan Tata Letak Fasilitas Gudang Dengan Pendekatan Dedicated Storage Pada Gudang Distribusi Barang Jadi Industri Makanan Ringan." Jurnal Teknik Industri: Jurnal Hasil Penelitian Dan Karya Ilmiah Dalam Bidang Teknik Industri 7.1 (2021): 1-6.

Anam, Muhammad Syaiful, Moch Nuruddin, and Hidayat Hidayat. "Usulan Perbaikan Layout Area Gudang Kering Logistik Menggunakan Metode Dedicated Storage di PT. Starfood International." Jurnal Serambi Engineering 8.4 (2023).

Sarathamani, Anamika Palavesam, and Anil Kumar. "Fuzzy machine learning model for class-based flood damage assessment from planetscope temporal data." Journal of Applied Remote Sensing 18.1 (2024): 014523-014523.

Sitorus, Helena, Rudianto Rudianto, and Meriastuti Ginting. "Perbaikan Tata Letak Gudang dengan Metode Dedicated Storage dan Class Based Storage serta Optimasi Alokasi Pekerjaan Material Handling di PT. Dua Kuda Indonesia." Jurnal Kajian Teknik Mesin 5.2 (2020): 87-98.

Irman, Ade, Y. Muharni, and Andri Yusuf. "Design of warehouse model with dedicated policy to minimize total travel costs: a case study in a construction workshop." IOP Conference Series: Materials Science and Engineering. Vol. 909. No. 1. IOP Publishing, 2020.

Anto, C., et al. "Redesign production layout using dedicated storage method: case study of PT. Solo Grafika Utama." IOP Conference Series: Materials Science and Engineering. Vol. 943. No. 1. IOP Publishing, 2020.

Shafira, Sasya. “PERANCANGAN ULANG TATA LETAK GUDANG BAHAN BAKU DENGAN METODE DEDICATED STORAGE UNTUK MEMINIMALKAN JARAK PEMINDAHAN BAHAN DI PT. X” . Diss. UPN VETERAN JATIM, 2022.

El Islami, Nur, and Helshy Azzahra. "ANALISIS PERANCANGAN TATA LETAK GUDANG CURAH MENGGUNAKAN METODE DEDICATED STORAGE (STUDI KASUS: PT KRAKATAU JASA LOGISTIK)." (2022)

Utama, Hendrawan Taksaka. Analisis Penempatan Barang Menggunakan Metode Dedicated Storage Pada Gudang Bahan Baku PT Agrofarm Nusa Raya. Diss. Politeknik APP Jakarta, 2022.

Ferdiansyah, Fikar Rizki. “ANALISIS RELAYOUT PADA GUDANG BARANG MENGGUNAKAN METODE DEDICATED STORAGE (Studi Kasus pada Home Industri Alika Collection Soreang Kabupaten Bandung)”. Diss. STIE Ekuitas, 2023.

Utari, Winda Ayuningtyas. “REDUKSI AREA TRANSIT PART OVERFLOW DENGAN PERBANDINGAN METODE DEDICATED STORAGE DAN METODE CLASS BASED STORAGE”. Diss. Universitas Pembangunan Nasional Veteran Jakarta, 2020.

Alfian, Achmad, and Shendy Pratama. "Perancangan Tata Letak Warehouse Produk menggunakan metode dedicated storage di PT Nutrifood Indonesia." Jurnal Ilmiah Teknik Industri 10.1 (2022): 77-85.

Rosihin, Rosihin, Dadi Cahyadi, and Supriyadi Supriyadi. "Analisa Perbaikan Tata Letak Gudang Coil dengan Metode Class Based Storage." Jurnal INTECH Teknik Industri Universitas Serang Raya 7.2 (2021): 166-172.

Isnaeni, Nadila Safira, and Novie Susanto. "Penerapan Metode Class Based Storage Untuk Perbaikan Tata Letak Gudang Barang Jadi (Studi Kasus Gudang Barang Jadi K PT Hartono Istana Teknologi)." Industrial Engineering Online Journal 10.3 (2021).

Kulsum, Kulsum, Yusraini Muharni, and Al-Atur Akbar Felayani. "Usulan pengoptimalan tata letak gudang W12 menggunakan kebijakan dedicated storage dengan penerapan simulasi (Studi kasus: PT. XYZ)." Teknika: Jurnal Sains dan Teknologi 16.2 (2020): 285-292.

Novrianto, Tsany Farras, Deny Andesta, and Moh Jufriyanto. "Usulan Tata Letak Pada Gudang Sparepart dengan Kebijakan Class Based Storage Berdasarkan Analisis ABC di PT. XYZ." G-Tech: Jurnal Teknologi Terapan 8.2 (2024): 975-984

DOI: https://doi.org/10.26877/asset.v6i2.18727

Refbacks

There are currently no refbacks.

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

Advance Sustainable Science, Engineering and Technology (ASSET)

E-ISSN: 2715-4211
Published by Science and Technology Research Centre

Universitas PGRI Semarang, Indonesia

Website: http://journal.upgris.ac.id/index.php/asset/index
Email: [email protected]